$10.99 - $17.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure. - Pump Head Compatibility: Presta / Schrader pumps - Tire Valve Compatibility: Presta / Schrader / Dunlop valves - Gauge: Reads 160psi / 11 bar, 1-1/2" analog - Pressure Tuning: Air release button - Material: Engineering grade polymer / aluminum - 360 degree rotatable gauge, Dust cap - Size: 6.2 x 5.8 x 3cm / 2.4" x 2.3" x 1.2" - Weight: 50g / 1.76oz
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Elite 90 is designed especially for triathlon specific saddles with vertical rear rails. - Material: CNC aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5kg / 5.5lb - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4cm / 3.4" x 3" x 2.9" - Weight: 102g / 3.60oz (Total), 88g / 3.10oz (w/o inflator bracket)
- Ball-inflating needle for footballs, basketballs and more
Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.
Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.
Head Washer for 2371 Head
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible
Super small and super light, SKS's Supershort Mini Pump is great for the minimalist rider. The head works with both Schrader and Presta valves, and the handle folds into a T for easy pumping.
Now 50mm higher than before, the Air X-Press 8.0 is an upgrade of our sturdy and lightweight plastic floor pump with an accurate gauge for precise pressure control. - Displays both bar and PSI - Convenient handling due to proven SKS MULTI VALVE pump head with thumb lock lever - Inflates easily up to 8 bar/115 PSI
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
Airflex Explorer Mini Pump is a small pump with great impact. The hose, stored in the pump tube, screws onto the valve head. Flexible hose prevents damage to valve stem during inflation. Pump handle is soft, easy-to-grip compound. Great pump for MTB or urban bikes. Small enough to fit in jersey pocket, but also includes a frame mount. - Inflates to 5 bar/73 psi - Compatible with Presta, Schrader, and Dunlop Valves - Includes a holder which attaches at cage mount - Length: 205mm - Weight: 132 grams - Made in Germany
Airflex Racer Mini Pump is a small pump with great impact. The hose, stored in the pump tube, screws onto the Presta valve head. Flexible hose prevents damage to valve stem during inflation. Pump handle is soft, easy-to-grip compound. Great pump for high-pressure tires. Small enough to fit in jersey pocket, but also includes a frame mount. - Inflates to 8 bar/115 psi - Compatible with Presta and Dunlop Valves - Includes a holder which attaches at cage mount - Length: 196mm - Weight: 105 grams - Made in Germany
SKS's AirKompressor 12.0 Floor Pump can handle it all. The E.V.A. head works with all valves and the 174 psi/12 bar max pressure lets you fill up even the highest quality road tubulars. Fat mountain tires are also easy to air up, too, thanks to the high-volume, extra-long steel body. And, an oversize gauge and long hose make the AirKompressor perfect for every job.
Airworx 10.0 Anthracite Floor Pump from SKS provides a large volume of air per stroke. The soft-touch handle with grip recesses provides a comfortable feel. The precision gauge can be easily seen, positioned at the top of the pump body. In addition to the long hose, the pump is fitted with a Multi Valve head for use with all valve types. - Inflates to 10 bar/144 psi - Compatible with Presta, Schrader, and Dunlop Valves - Replacement/rebuild parts are available - Solid metal base for a firm foothold - Measurements: 665mm height - Made in Germany
The SKS RideAir is the first refillable air tank from SKS for when you are on the road. It can be used in place of a pump or C02 cartridges emergency tire repairs. The RideAir effortlessly fills your tires in seconds. Simply refill the canister at home using your floor pump. This simple and environmentally friendly solution can be safely transported in your bottle cage. The RideAir is also a must have for tubeless tire riders: it saves space and sets up almost all tubeless tires. - Fits in a standard water bottle cage - Fills from an air compressor or high pressure pump via a Schrader valve - For tire inflation, fits to Presta, Schrader, or Dunlop valves - Integrated canister pressure gauge
SKS's Rennkompressor Floor Pump is a legend. For over four decades, this German work of art has been the go-to pump for countless cyclists the world over. The E.V.A. head works with all valves and the 230 psi/16 bar max pressure can fill even the highest quality track tubulars. Sturdy aluminum construction, an oversize gauge, and a long hose will make it your go-to pump, as well.
The Airstep Bicycle Foot Pump combines the virtues of a classic floor pump with a foot pump. - Extra-large pressure gauge - Integrated storage space for the spiral hose and head - Aluminum foot pedal allows you to inflate with the ergonomic strength of your legs - Pump locks down and includes a wall bracket as a space-saving solution - Inflates to 7 bar/102 psi - Compatible with Presta, Schrader, and Dunlop Valves - Made in Germany
The digital update of the tried-and-tested Airstep foot pump impresses with a high-quality, precise digital gauge. The black LED display shows the pressure perfectly in bright orange numerals. The first-class sensor technology with a deviation tolerance of up to 1.5% guarantees a high measuring accuracy, thus ensuring optimum tire-pressure adjustments. Another innovation is the powder-coated aluminum foot pedal. Thanks to its scratch-resistant coating, it not only offers high-impact resistance, it also impresses with its modern black appearance.
Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.
Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere. And it handles an astounding 600 psi max.
TyreWiz is the first-of-its-kind tire pressure sensor for riders of mountain bikes and road bikes. Lightweight, durable, and powered by a long-lasting user-replaceable coin cell battery, TyreWiz monitors air pressure in real-time and relays the data to a cycling computer or a smartphone. The TyreWiz app uses that data to deliver personalized recommendations and pressure alerts. For the first time, riders have access to highly accurate real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort. - TyreWiz is the first real-time tire pressure sensor for bicycle riders - Designed for all bike riders, regardless of their experience or bike’s intended use - Works with any tire that uses a removable Presta-style valve core: both tube and tubeless, and tires with anti-flat sealant - Data can be read on a cycling computer or smartphone with the app for iOS and Android - Smartphone app displays personalized recommendations, current tire pressure, and low/high-pressure alerts - Retail package includes two sensors, batteries, and a valve core removal tool - Use it for every ride to find the perfect combination of tire, wheel, and pressure in changing terrain and conditions - Include LED lights to indicate when pressure is outside the target range - Designed for road and mountain bike riders - Personalized tire recommendations in the smartphone app for iOS and Android - NFC pairing for fast and easy connection by BLE to a phone - Data reported with +/- 2% accuracy at .1 PSI resolution - Broadly compatible with tires that use a removable Presta-style valve core - Inexpensive, user-replaceable CR1632 battery lasts for 300 hours - IPX7 dustproof/waterproof rating - Box includes valve core removal tool for installation
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.
Page 1 of 5 Next page